Issue of November 2023
1. Identification of substance and company
1.1. Product identifier
Product name: Zirconium and zirconium alloys.
Corrosion, good strength and creep resisting grades in product forms: semi-finished products, bar and tube.
1.2. Relevant identified uses of the mixture and uses advised against
The products are used extensively in the most varying applications, especially where stainless steels or other materials have insufficient corrosion resistance.
1.3. Details of the supplier of the safety information sheet
Manufacturer and supplier:
Alleima AB
S-811 81 SANDVIKEN
Sweden
Tel: +46 26 426 00 00
Website: www.alleima.com
Contact: ehs.miljoskydd@alleima.com
1.4. Emergency information
In case of emergency, contact your local authority advisor.
2. Hazards identification
2.1. Classification of the mixture
Flam. Sol. 1
H228: Flammable solid.
2.2. Label elements
No signal word or hazard statement.
2.3. Other hazards
There are no hazards of concern for man or the environment from Zr 702 in the forms supplied.
Dust and fume may be generated during processing e.g. in welding, cutting and grinding. If airborne concentrations of dust and fume are excessive, inhalation over long periods may affect workers' health, primarily of the lungs.
3. Composition/information on ingredients
Element | CAS number | EINECS number |
Concentration, wt-% | Classification |
Hazard statement |
---|---|---|---|---|---|
Zirconium |
7440-67-7
|
231-176-9
|
>97
|
Flam. Sol. 1 | H228: Flammable solid |
Hafnium |
7440-58-6
|
231-166-4
|
<3
|
Flam. Sol. 1 | H228: Flammable solid |
Tin |
7440-31-5
|
231-141-8
|
<2
|
- | - |
Niobium |
7440-03-1
|
231-113-5
|
<2
|
- | - |
Iron |
7439-89-6
|
231-096-4
|
<0.25
|
- | - |
Chromium |
7440-47-3
|
231-157-5
|
<0.2
|
- | - |
Nickel |
7440-02-0
|
231-111-4
|
<0.1
|
Carc2 | H351: Suspected of causing cancer |
Skin Sens.1 | H317: May cause an allergic reaction | ||||
STOT RE 1 | H372: Causes damage to organs through prolonged or repeated exposure |
Table 1 Composition and classification according to EC 1272/2008 regulation.
4. First aid measures
4.1. Description of first aid measures
There are no specific first aid measures developed for zirconium and zirconium alloys in massive form. Medical attention should be sought in case of an excessive inhalation of dust, a physical injury to the skin or to the eyes.
4.2. Most important symptoms and effects both acute and delayed
No relevant information has been identified.
4.3. Indication of any immediate medical attention and special treatment needed
No relevant information has been identified.
5. Firefighting measures
5.1. Extinguishing media
Zirconium and zirconium alloys in massive form are not combustible but material in the form of small chips, fine turnings or dust can self-ignite at room temperature or if exposed to any nearby heat source.
If possible; allow fire to burn out. Fire can be controlled by covering with powder from type D fire extinguisher, sand, or dry table salt. Carbon dioxide is not effective. Water applied to burning zirconium may cause an even bigger fire or an explosion.
5.2. Special hazards arising from the mixture
Care should be taken to avoid exposing small chips, fine turnings and process dust (e.g. from grinding and blasting operations) to air and fire (auto-ignition temperature 330 °C/626 °F for powders). Emits toxic fumes under fire conditions.
5.3. Advice for firefighters
Dry zirconium and zirconium alloy powder burns while releasing much heat. Piled chips burn vigorously.
If a fire starts in a mass of wet metal fines, such as a drum of damp machining chips, the initial fire may be followed by an explosion. Therefore, when in doubt, individuals should leave and not attempt to extinguish the fire, but let it burn out. The explosion characteristics of such material are caused by the hydrogen and steam generated by the burning mass.
6. Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Not applicable for the product in massive form.
For fines and dust; wear appropriate respiratory and protective equipment specified in section 8. Isolate spill area and provide ventilation. Avoid breathing dust or fumes. Avoid contact with skin and eyes.
6.2. Environmental precautions
Not applicable for the product in massive form.
For fines and dust; do not allow to be released to the environment.
6.3. Methods and material for containment and cleaning up
Not applicable for the product in massive form.
For fines and dust; clean spills in a manner not to disperse dust into the air. Sweep or scoop up. Do not use metallic tools or equipment due to the risk of sparking.
Place in an appropriate container for further handling and disposal according to local rules.
6.4 Reference to other sections
None.
7. Handling and storage
7.1. Precautions for safe handling
There are no special technical measures involved for handling zirconium and zirconium alloys in massive form. Normal precautions should be taken to avoid physical injury from coiled or bundled products, possibly with sharp edges.
Machining operations require the use of cutting fluids to reduce the temperature of waste material which might ignite without coolant.
7.2. Conditions for safe storage, including any incompatibilities
The product is stable in storage. However, it should be kept in mind that the products may display sharp edges and a sufficiently robust place capable of carrying the significant weight of the products should be used for storage.
Keep fine turnings completely dry or very wet. When wet, the water content should be more than 25 percent by weight for maximum safety in handling. Severe explosions can result from the ignition of Zirconium powder or machining fines containing moisture in the concentration range of 5-10 percent.
7.3. Specific end uses
None identified.
8. Exposure controls/personal protection
8.1. Control parameters
Elements and compounds | TD | ID | RD |
Iron oxide as Fe | 3.5 | ||
Chromium and its compounds as Cr | 0.5 | ||
Nickel as Ni | 0.5 | ||
Tin as Sn | 2 |
Table 2 Occupational Exposure Limits, NGV, (mg/m3 ) in Sweden.
NGV = Nivågränsvärde (One working day exposure)
TD = Total dust
ID = Inhalable dust
RD = Respirable dust
8.2. Exposure controls
8.2.1. Appropriate engineering controls
In the processing of all metallic materials, exposure to fume and dust must be kept below any legally imposed limits.
Dust and fume may be generated in use, e.g. by cutting, grinding and welding processes, which may contain materials subject to exposure limits. To ensure these limits are not exceeded, adequate general or local ventilation or fume extraction should be provided.
8.2.2. Individual protection measures, such as personal protective equipment
In accordance with European and national health and safety regulations, it is necessary to assess the need for personal protection equipment and appropriate approved respiratory protection should be provided for those workers at risk of inhalation. Suitable hand and eye protection should be worn where there is a risk of laceration, flying particles, welding heat radiation or contact with oils during processing.
The process of welding should only be performed by trained workers with the personal protective equipment in accordance with the laws of each member state relating to safety.
8.2.3. Environmental exposure controls
Emissions from ventilation or equipment in the workplace should be controlled to assure that environmental legislation is fulfilled.
9. Physical and chemical properties
9.1. Information on basic physical and chemical properties
Appearance: Solid; metallic, lustrous grey-white color
Odor: Odorless
Water solubility: Insoluble
Melting: 2125 K (1852°C, 3366 °F)
Density: 6.5 g/cm3 (0.235 lbs./in3)
9.2. Other information
Thermal conductivity, 22 W/(m °C). 0.31 W/(in. °F)
10. Stability and reactivity
10.1. Reactivity
Zirconium and zirconium alloys in massive form are stable and non-reactive under normal ambient atmospheric conditions.
Fines shall be kept away from open flame and heat.
10.2. Chemical stability
Zirconium and zirconium alloys in massive form are stable and non-reactive under normal ambient atmospheric conditions.
10.3. Possibility of hazardous reactions
Metallic or metal oxide fumes and dust may be produced during welding, grinding or cutting operations.
10.4. Conditions to avoid
Avoid creating or accumulating fines or dust.
10.5. Incompatible materials
Dissolves in hydrofluoric acid. Ignites in the presence of fluorine.
When heated above 200 °C (392 °F), reacts exothermally with chlorine, bromine, halocarbons, carbon tetrachloride, carbon tetrafluoride and freon.
10.6. Hazardous decomposition products
See section 10.3. and 10.5.
11. Toxicological information
11.1. Information on toxicological effects
Acute toxicity
Zirconium is not acutely toxic.
Irritation
The exposure route of concern is inhalation. These zirconium grade products are, in massive form, not capable of being inhaled.
Corrosivity
Zirconium is not corrosive to skin.
Sensitization
Zirconium is not a dermal sensitizer.
Repeated dose toxicity
Zirconium has no specified effect for dermal, inhalation or oral exposure.
During mechanical working, flame-cutting, or welding, dust, or fumes may be formed. Over long periods, inhalation of excessive airborne levels may have long term health effects, primarily affecting the lungs.
Carcinogenicity
Zirconium is not classified as carcinogenic.
Mutagenicity
Zirconium is not classified as mutagenic.
Toxicity for reproduction
Zirconium is not toxic for reproduction.
12. Ecological information
12.1. Toxicity.
No data.
12.2. Persistence and degradability
No data.
12.3. Bioaccumulative potential
No data.
12.4. Mobility in soil
Not soluble in water. No data.
12.5. Results of PBT and vPvB assessment
Not relevant.
12.6. Other adverse effects
Do not allow material to be released to the environment without proper governmental permits. No further relevant information available.
13. Disposal considerations
13.1 Waste treatment methods
Surplus and scrap (waste) of zirconium and zirconium alloys is a valuable commodity and in demand to produce prime zirconium alloys.
Recycling routes are well-established, and recycling is therefore the preferred disposal route.
Disposal to landfill is not harmful to the environment but is a waste of resources and therefore less desirable than recycling.
Due to the fire hazards of fines and dust; accidental fires should be controlled by covering with a dry powder type of extinguisher.
14. Transport information
For Zirconium scrap (turnings), UN number 1932 is valid for land, railway, inland waterway, marine and air transport. Corresponding packaging class is IMO 4.2.
15. Regulatory information
15.1. None.
15.2. Chemical safety assessment
No chemical safety assessment has been published.
16. Other information
EU
The zirconium products per section 1 in this SIS, conform to requirements, regulations or guidance given in ECHA C&L Inventory
Declaration
The information given in this safety information sheet is based on the present level of our knowledge and experience. The data sheet describes the products with respect to safety requirements. The data given is not intended as a confirmation of product properties and does not constitute a legal contractual relationship, nor should it be used as the basis for ordering these products.
*Previous designation: Material Safety Datasheet (MSD)